Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Cutting Board (http://volksrods.com/forum/forumdisplay.php?f=5)
-   -   What did you do yesterday... (http://volksrods.com/forum/showthread.php?t=6044)

ConductorX April 6th, 2005 05:52 PM

On another forum where I hang out we have a running post on some activity we did the day before related to our VW hobby. The idea is to inspire each other to do some small amount of work related our Volkswaqens... it could be just washing it taking a drive some where or some actual work you did. The intention is to only post VW related activities if you didn't do anything VW related then don't post.

Last Friday I installed the engine into the autostick. After installing it I found I had the wrong nut on the flex plate. The engine came back out and the nut replaced. The engine went back in. I bolted the flex plate to the torque converter and when I was tightening the last bolt the nut broke off the flex plate.... [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]

The engine had to come back out. [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]

Tonight I got the bolt out of the broken nut and then removed the other three bolts. I pulled the engine out once again. Tomorrow I'll weld the nut back onto the flex plate.

Before anyone asks, Bentley says "Unbolt the flexplate from the torque converter or seal damage will occur when pulling the torque converter with the engine." Since there are no more seals in captivity I unbolted the flex plate.

"G"

You can see the torque converter and the flexplate in this photo, the bolt is already removed.
http://photoalbum.kaferweb.com/album...g/IMG_0880.jpg

FlatBlacker April 6th, 2005 06:33 PM

I crushed a VW seat with a bobcat, does that count?

Griznant April 6th, 2005 07:22 PM

I can honestly say that I have been working on my rod for the last 5 days straight and almost have it ready to go back on wheels again. A major re-loop for the whole project made me de-construct everything I had previously done, and re-work it.

The chassis should be back on wheels by the weekend with the body re-work to follow after that and my new-and improved chop and sectioning.

It'll be cool. Trust me. [img]style_emoticons/<#EMO_DIR#>/smile.gif[/img]

FONZY April 6th, 2005 07:58 PM

yesterday I transplanted a new rear apron on to the roadster project... got it all tacked up... [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

then this morning whilest not shaving and smokin a cigarette [img]style_emoticons/<#EMO_DIR#>/smokin.gif[/img] I looked and realized the damn thig was crooked... [img]style_emoticons/<#EMO_DIR#>/imwithstupid.gif[/img] as well as the rain gutter area I put in last weekend for the extended 'hebmuller' decklid surround... [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img]

So today I cut all off again and started from scratch..
I actually figured out a neat way to do it this time using parts of an old set of rear fenders ... will post up the picks later when It's gettin finished.

Double Trouble April 6th, 2005 08:28 PM

i painted sum flames on my truck. Looks pretty good for my first attempt but nowhere near perfect. if i can get sum pics on my dumbputer ill post them

hotrodheb April 6th, 2005 08:41 PM

I walked past the truck in the garage tonight! (Had a fucking meeting that started at 5:30 and I didn't get home until 8:30! [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]

whitelightning April 6th, 2005 09:01 PM

looked at the car.thats about it.too damn hot to work outside

walt April 6th, 2005 09:08 PM

I built the frame-work to support the rear trailing arms on the 34.

ThrasherBill April 6th, 2005 09:10 PM

I drove my bug to work today. Oh wait, I do that everyday [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]



ThrasheR

Scott H April 7th, 2005 03:43 AM

Quote:

Originally posted by ThrasherBill@Apr 7 2005, 12:10 AM
I drove my bug to work today. Oh wait, I do that everyday [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]
Hey, me too!

vwfanatic April 7th, 2005 03:44 AM

i did some cleanup on the chassis to prepare for paint, also trial fitted the rear springplates and then decided to wait till i paint the stuff before i assemble it, also began disassembling the front beam to fit the dropped beam, and began removing the wiring harness from the '60 body as well as marking for some of the patch panels that need to be installed.....shoot, when you type it all out, it actually looks like i did something.....and no steve we wont talk about hitting myself in the head with the claw hammer [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]

jaransonT3 April 7th, 2005 04:42 AM

I worked on getting the motor and rear subframe/trans for my Squareback back together so I can get her in the road and then get working on my Type 3 Lead Sled project.

http://mywebpages.comcast.net/jarans...e/Subframe.jpg

http://mywebpages.comcast.net/jarans...e/NewBoots.jpg

http://mywebpages.comcast.net/jarans...FilterBrkt.jpg

NICKSTER April 7th, 2005 05:19 AM

I went to Bingo with my nurse and her cousin, we all lost!

flatfourrodder April 7th, 2005 06:21 AM

I didnt do any work on my Rod. But my wife worked on my rod instead. [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]
Oh ya didnt work on the VW, the other offer was too good! [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

discoloredcurrency April 7th, 2005 06:29 AM

Quote:

Originally posted by jaransonT3@Apr 7 2005, 06:42 AM

http://mywebpages.comcast.net/jarans...FilterBrkt.jpg
<div align="right">Quoted post</div>


the background in that picture is out of..........................focus? [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]

sorry i'm a retard!

looks good! [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

i spent yesterday working on a mf'n fi 1600 fastback! [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img]

god, we need to convert it to carbs!!!!

hotrodheb April 7th, 2005 06:43 AM

Quote:

Originally posted by walt@Apr 6 2005, 09:08 PM
I built the frame-work to support the rear trailing arms on the 34.
<div align="right">Quoted post</div>

Uh Walt,..... PICTURES!?!?!?! [img]style_emoticons/<#EMO_DIR#>/Idunno.gif[/img]

Quote:

Originally posted by discoloredcurrency@Apr 7 2005, 06:29 AM
the background in that picture is out of..........................focus? [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]
<div align="right">Quoted post</div>

No, that would be the beginnings of a rusty focus! (look at the plate area)

btrghia April 7th, 2005 06:55 AM

got my sewing machine out and started sewing the binding on my carpet.

TeamEvil/TC April 7th, 2005 06:56 AM

Went to a candle-light vigil for our recently departed Pope, drove the Ghia to and from.

jaransonT3 April 7th, 2005 07:03 AM

Quote:

Originally posted by discoloredcurrency@Apr 7 2005, 10:29 AM

i spent yesterday working on a mf'n fi 1600 fastback! [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img]

god, we need to convert it to carbs!!!!
<div align="right">Quoted post</div>

Hey Andy -

If you decide to convert to carbs, (I don't recommend it, btw. The Type 3 FI system is simple and reliable and usually pretty easy and cheap to get running right. For the best help with the Type 3 FI, go to www.vwtype3.org) please remove all the FI stuff carefully. There are lots of Type 3 people that will gladly buy them from you.

RATRODVW April 7th, 2005 07:14 AM

Quote:

Originally posted by hotrodheb@Apr 7 2005, 07:43 AM
No, that would be the beginnings of a rusty focus! (look at the plate area)
<div align="right">Quoted post</div>


That's patina... [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]


I helped a fellow volksrodder work on their wrecked car... [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

1slo3 April 7th, 2005 07:19 AM

i drove my 67 square to work and hauled stuff in it to the dump, drove the 71 square to the store, drove the 64 notch to rehearsal and then checked out the new patina it is getting on the bare metal that has been exposed front the fender bender on the front apron... ahhhh.... patina

alltypesvw April 7th, 2005 07:27 AM

I swept the silt out of my workshop. got the last two 17" tires on the corrado, and recharged a battery.

vwfanatic April 7th, 2005 08:06 AM

great news heidi [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

way to go

kustomdlux April 7th, 2005 03:43 PM

I shaved the trim holes on my glove box door. Not much but it looks a lot better.

daveyj April 7th, 2005 04:53 PM

got my canvas for my roll top, sewed it up
i'm a much better welder than sewer (is that a word? sewing guy anyways)
almost got the motor to fire, gonna liquid fire that sucker soon [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]

SLOBugin69 April 7th, 2005 05:49 PM

I've had my bug for almost 3 years and I finaly went to the DMV turned in the pink slip, registered it and got shinny new plates..... Its going to be on the road soon, finished or not!!

mcotie April 7th, 2005 05:59 PM

pushed my bug out of the garage to clean up a peanut oil spill (my son accidentally knocked over my deep fryer) plus this morning I limped a my buddy's 65 Mustang to the shop to get worked on [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img] (don't even say anything).
Also ordered two cases of Beer to be delivered tomorrow to the good folks at Flyrite Choppers.

mitch

hotrodheb April 7th, 2005 08:37 PM

Quote:

Originally posted by mcotie@Apr 7 2005, 05:59 PM
Also ordered two cases of Beer to be delivered tomorrow to the good folks at Flyrite Choppers.

mitch
<div align="right">Quoted post</div>

Somebody is trying to get a few extras thrown in on their bike! [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

ConductorX April 10th, 2005 01:47 PM

Yesterday, I drove 160 miles round trip from Long Beach, MS to Mobile, AL to attend the Rare Air Club show at the USS Alabama. I won a Turkey Fryer Door Prize. [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

Today I picked up my sand rail and various assorted parts from Cajun66.

[img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

"G"

Anyone interested in a bug with some fine patina?
http://photoalbum.kaferweb.com/album...s/IMG_0966.jpg

lancelot link April 10th, 2005 01:56 PM

Picked up the donor floorpan for my next Volksrod and a load of new repair panels including some pre-67 stuff.......sold the pre-67 stuff and the wheels/tyres from the floorpan.

alltypesvw April 10th, 2005 04:04 PM

I picked up a set of porsche brakes, spindles and trailing arms. THANKS GRANT!

bugdust April 10th, 2005 07:29 PM

http://photoalbum.kaferweb.com/album...s/IMG_0966.jpg
I'd drive it. I like the stance, too! [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

Yesterday and today I worked on moving a 16'x16' workshop. We have it moved into my backyard but not set up yet. I'm hoping to get it blocked up tomorrow evening after work and wired up sometime this week. This is volkrod related because this is my new (to me) workshop that will allow me to hook up my welder and compressor finally [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] I'll post pics soon.

jaransonT3 April 10th, 2005 08:26 PM

Well, I finished putting the engine for my Squareback back together and just about have the subframe and trans ready to go back in. Here is a picture of the nearl completed engine.

http://mywebpages.comcast.net/jarans...physEngine.jpg

Not a bad weekend...considering I really only worked on the car on Sunday.

ConductorX April 11th, 2005 03:17 AM

Looks good I would love to score some Type III tin ware and external parts for my golf cart project. "G"

busguy71 April 11th, 2005 03:45 AM

Yesterday I reinstalled the mustache bar engine mount for the bus, which I had to weld at work last week. I helicoiled the block (cause GEX send it to me that way and the helicoil pulled out [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img] ) The mount fit [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] and I slapped the quiet pack exhaust back on, installed the engine tray, tin, and bumper and THE BUS IS READY!!!! Took my second drive of the season last night and its good to go [img]style_emoticons/<#EMO_DIR#>/cool.gif[/img] Next week- oil change

vwfanatic April 11th, 2005 04:11 AM

gee thanx tom....you didnt even mention that you ran into me yesterday [img]style_emoticons/<#EMO_DIR#>/cry.gif[/img]

saw busguy71 at our local massive spring swap meet where i was vending with vwsplitman and selling his masterseries line of coatings as well as his ever increasing line of bodywork and fabrication tools. Was a nice sunny day in the low 70's and business was great, also ran into jimw back from vacation with more of his great swapmeet scores and tom (tmvdubs) was there as well and delivered my matching pair of march '65 porsche wide 5 steel rims [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] ....so actually there were a number of volksrodders at this event.....cool [img]style_emoticons/<#EMO_DIR#>/cool.gif[/img]

busguy71 April 11th, 2005 04:14 AM

Quote:

Originally posted by vwfanatic@Apr 11 2005, 04:11 AM
gee thanx tom....you didnt even mention that you ran into me yesterday [img]style_emoticons/<#EMO_DIR#>/cry.gif[/img]

saw busguy71 at our local massive spring swap meet where i was vending with vwsplitman and selling his masterseries line of coatings as well as his ever increasing line of bodywork and fabrication tools. Was a nice sunny day in the low 70's and business was great, also ran into jimw back from vacation with more of his great swapmeet scores....so actually there were a number of volksrodders at this event.....cool [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]
<div align="right">Quoted post</div>

oh yeah I went to a swap meet and saw dan........HAPPY NOW???!!! [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

I scored a few tools- small toe dolly, bent file, remote ignition box [img]style_emoticons/<#EMO_DIR#>/smokin.gif[/img] and my teacher sold me a 1967 4 speed vette transmission for $250 [img]style_emoticons/<#EMO_DIR#>/cool.gif[/img]

vwfanatic April 11th, 2005 04:16 AM

oh and tom....sorry for almost letting your secret slip [img]style_emoticons/<#EMO_DIR#>/unsure.gif[/img] didnt know that was your dad with you.....coming out of the closet like that can be rough (at least that's what i heard [img]style_emoticons/<#EMO_DIR#>/unsure.gif[/img] )


















[img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] gotcha

busguy71 April 11th, 2005 02:16 PM

ROFL!!! [img]style_emoticons/<#EMO_DIR#>/bowdown.gif[/img] [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] Thats hilarious! Its ok, you didnt know I was sneaking it home and he doesnt have a clue anyway [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] hopefully I'll see you soon...if you know what I mean [img]style_emoticons/<#EMO_DIR#>/wink.gif[/img]

daveyj April 11th, 2005 06:39 PM

came back from jasper, finished my roll top, tried to get the motor to fire.
got it to run tonight. i'd get more done if i did'nt have to work [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]
who says alberta is flat [img]style_emoticons/<#EMO_DIR#>/cool.gif[/img]

Ryan April 11th, 2005 06:56 PM

yesterday i brought the gadzooks bug home.

dayzwalker April 11th, 2005 07:00 PM

I think I got out of bed yesterday [img]style_emoticons/<#EMO_DIR#>/confused.gif[/img]



...oh nope, that was today [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

whitelightning April 11th, 2005 07:11 PM

installed my cars carpet.what a bitch to do

cdubvdub April 11th, 2005 07:13 PM

went to the bug in [img]style_emoticons/<#EMO_DIR#>/smokin.gif[/img]

vwfanatic April 12th, 2005 04:02 AM

lap duty

alltypesvw April 12th, 2005 04:09 AM

dang.. dan gets all the pussy.





I'm sorry, that was lame.. but I couldn't resist...

NICKSTER April 12th, 2005 05:20 AM

Quote:

Originally posted by alltypesvw@Apr 12 2005, 04:09 AM
dang.. dan gets all the pussy.





I'm sorry, that was lame.. but I couldn't resist...
<div align="right">Quoted post</div>


It'll sound better if I say it............

Damm, Dan gets all the pussy! [img]style_emoticons/<#EMO_DIR#>/Idunno.gif[/img]

vwfanatic April 12th, 2005 08:49 AM

something else for us to celebrate when we all get together [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

BIG BAD BUG April 12th, 2005 08:52 AM

Slept, ate, towed some cars, took a dump, went back to sleep... [img]style_emoticons/<#EMO_DIR#>/Idunno.gif[/img]

Steve April 12th, 2005 08:56 AM

Quote:

Originally posted by vwfanatic@Apr 12 2005, 04:02 AM
lap duty


http://volksrods.com/forums/uploads/...7330_thumb.jpg http://volksrods.com/forums/uploads/...7366_thumb.jpg

<div align="right">Quoted post</div>


Oh my god...

Add a few bees flying around the room, and that right there would be my own personal hell...

1slo3 April 12th, 2005 08:57 AM

over the weekend i took possesion of my new house,
found out that the PO didn't do a thing to clean it,
cleaned it to find out it was beyond cleaning,
tore out the carpets,
started painting the walls,
moved 90% of my stuff from the old house to the new house,
started cleaning the old house so the landlord will give back deposit,
did the brakes on the front end of my purple notch,
found piles of HAZMAT type stuff left in a shed on my new property,
cleared said materials,
painted some more,
redid the floor in my daughter's new bedroom
and slept about 6 hours all weekend. whew! [img]style_emoticons/<#EMO_DIR#>/ohmy.gif[/img]

skaterwithasquare April 12th, 2005 05:30 PM

I caught strep throat on friday, and have been sleeping all day every day since. [img]style_emoticons/<#EMO_DIR#>/sad.gif[/img]

bugdust April 12th, 2005 05:50 PM

Quote:

Originally posted by vwfanatic@Apr 12 2005, 07:02 AM
lap duty
<div align="right">Quoted post</div>

I don't know why but I find that pic disturbing [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img] No offense Dan but I hate cats.

vwfanatic April 12th, 2005 06:43 PM

i find it disturbing too, that there are a few hundred cats there that dont have homes where they can get the love and attention that they so deserve because of stupid people that think that pets are disposable and when you get bored with them or move away or they sneeze, you throw them out. damn....you got me started [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]


and no offense, but i hate people who hate cats [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]

walt April 12th, 2005 06:48 PM

Another day in paradise.................Just sittin back covered in pussy hair.









































Cats are my favorite people too.

daveyj April 12th, 2005 06:58 PM

picked up new cap,points, condenser and rotor.
pruned apple tree ,
o.k, no job or yard work and i'd get more done [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]







got two cats, one just passed away. he was a stray we took in.poor bastard.
thanks dan.

bugdust April 12th, 2005 08:05 PM

Quote:

Originally posted by vwfanatic@Apr 12 2005, 09:43 PM
i find it disturbing too, that there are a few hundred cats there that dont have homes where they can get the love and attention that they so deserve because of stupid people that think that pets are disposable and when you get bored with them or move away or they sneeze, you throw them out. damn....you got me started [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]


and no offense, but i hate people who hate cats [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]
<div align="right">Quoted post</div>


I got you started? Cool ,that's what I'm here for. [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] We actually have a cat (& a dog, if you consider a dachsund a dog [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] , actually, he's a pretty good dog). I don't particularly care for either one but I'm not an animal person. I don't hate them or anything, I could just do without them and be fine [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] The wife & kids love them and are always spending $$ on them [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]

vwfanatic April 13th, 2005 03:19 AM

no biggy charlie.....there are animal lovers, and there are those other stupid people....... [img]style_emoticons/<#EMO_DIR#>/rollingeyes.gif[/img]

sorry, i cant stop.

my cats are my kids [img]style_emoticons/<#EMO_DIR#>/wub.gif[/img]

busguy71 April 13th, 2005 03:43 AM

I was gonna put insurance back on my bus last night, but it would be like 500 every 6 months because I'm freakin 23...even though no accidents or tickets.....so I looked up classic car insurance and I'm getting a policy through Hagerty for 90 bucks a year!!!!! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] that means the extra $410 is going into the volksrod when it arrives.... [img]style_emoticons/<#EMO_DIR#>/smile.gif[/img] [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

vwfanatic April 13th, 2005 03:50 AM

tom

make sure you read the restrictions on the hagerty policy.....may have limited milage and may not be able to drive to and from work. OK if nothing happens, but if there is a claim.....they WILL research it.

busguy71 April 13th, 2005 03:56 AM

Quote:

Originally posted by vwfanatic@Apr 13 2005, 03:50 AM
tom

make sure you read the restrictions on the hagerty policy.....may have limited milage and may not be able to drive to and from work. OK if nothing happens, but if there is a claim.....they WILL research it.
<div align="right">Quoted post</div>

I only drive the thing about 1000 miles a year, I got a garage, and I really dont plan on crashing it this year [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

vwfanatic April 13th, 2005 04:02 AM

just trying to help tom.....i didnt plan on crashing my super a few years back either......but just had to see how much fun getting glass plucked out of your forehead in the emergency room could be. [img]style_emoticons/<#EMO_DIR#>/blink.gif[/img]

wlfhwk1 April 13th, 2005 05:27 AM

[img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] Well Sunday I got my new to me 64 bettle home. Long trip long day.
Monday I started cleaning the 10 years of dust and crap off of it and cleaning out the inside. Yesterday I took off the bumpers and finished cleaning out the inside. I put it in my garage which I built a door for yesterday also. Once I got it in the garage in jack it up and put it on jackstands. I started looking at the engine and trany. I didn't think it has the orginal engine in it. today I will hopefully get the fenders off and get the seat removed. [img]style_emoticons/<#EMO_DIR#>/smokin.gif[/img]

BIG BAD BUG April 13th, 2005 06:17 AM

Do I need to wait till tomorrow to tell you a bought another Beetle Today...???
ooopps... I did it now...
Bought a 2 owner '74 from A little old lady of 70+ years who's had it since Almost New...
Needs a little work, but it's still registered and running and it was Very Cheap...
That makes 6 Beetles and a kombi... [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]
I better start a dealership... [img]style_emoticons/<#EMO_DIR#>/sad.gif[/img]



Oh, I like cats...

























But I couldn't eat a whole one... [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]














Kidding...!! .. I do like 'em..






Really... [img]style_emoticons/<#EMO_DIR#>/smile.gif[/img]

hotrodheb April 13th, 2005 06:50 AM

I spent all day yesterday sitting in a courtroom on jury duty! [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] They went through 47 people before both sides were happy with the 12 jurors and 1 alternate. Luckily I was one of the three out of the original 50 that got to go home without having to sit in the Jury box.

No more jury duty for at least a year!!!! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]


Oh and when I got home, I had to move the TV (vcr,dvd, satellite box and extend the coax cable!) and move a 50 gallon fish tank to another room. All because my wife is on spring break this week and wants to rearrange the fucking house! [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img]

alltypesvw April 13th, 2005 12:52 PM

Quote:

Originally posted by busguy71@Apr 13 2005, 06:43 AM
I was gonna put insurance back on my bus last night, but it would be like 500 every 6 months because I'm freakin 23...even though no accidents or tickets.....so I looked up classic car insurance and I'm getting a policy through Hagerty for 90 bucks a year!!!!! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] that means the extra $410 is going into the volksrod when it arrives.... [img]style_emoticons/<#EMO_DIR#>/smile.gif[/img] [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]
<div align="right">Quoted post</div>

if the bus is the one in your avatar, it looks like a westy, I had a westywhen I was in college as my daily driver, I registered it as a mobile home because it qualified (2 beds, sink, stove, fridge) not only was insurance a hell of alot cheaper (90 a half instead of 600 a half) but my friends could consume alcohol in the back while operating and I had unlimited milage on my policy I'd just have to call the insurance company and tell them that I went somewhere way far away everyonce in a while.

purplepeopleeater April 13th, 2005 01:32 PM

Quote:

Originally posted by alltypesvw+Apr 13 2005, 12:52 PM--><div class='quotetop'>QUOTE(alltypesvw @ Apr 13 2005, 12:52 PM)</div><div class='quotemain'><!--QuoteBegin-busguy71@Apr 13 2005, 06:43 AM
I was gonna put insurance back on my bus last night, but it would be like 500 every 6 months because I'm freakin 23...even though no accidents or tickets.....so I looked up classic car insurance and I'm getting a policy through Hagerty for 90 bucks a year!!!!! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] that means the extra $410 is going into the volksrod when it arrives.... [img]style_emoticons/<#EMO_DIR#>/smile.gif[/img] [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]
<div align="right">Quoted post</div>

if the bus is the one in your avatar, it looks like a westy, I had a westywhen I was in college as my daily driver, I registered it as a mobile home because it qualified (2 beds, sink, stove, fridge) not only was insurance a hell of alot cheaper (90 a half instead of 600 a half) but my friends could consume alcohol in the back while operating and I had unlimited milage on my policy I'd just have to call the insurance company and tell them that I went somewhere way far away everyonce in a while.
<div align="right">Quoted post</div>
[/b][/quote]




hahaha, sweet deal....when i get my westy i'll remember that [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

ConductorX April 13th, 2005 06:01 PM

Tonight I pulled the seats out of the sand rail and I am getting ready to cut the car in half to realign the rear torsion tube level with the rest of the car.

http://photoalbum.kaferweb.com/album...l/IMG_0975.jpg

vwfanatic April 14th, 2005 06:05 AM

oh???? do tell [img]style_emoticons/<#EMO_DIR#>/Idunno.gif[/img]

wlfhwk1 April 14th, 2005 07:59 PM

[img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/smokin.gif[/img] Well It was almost yesterday, so it was actually this afternoon. A friend of mine has had a lot of bug parts sitting in his garage for 11 years and today he loaded me up with 2 complete engines and a whole bunch of bits. He still has a 73 super w/ a 1700cc that I want that part. disassembled. The girlfriend wants it for a baja and I want the engine for my rod so hopefully it will work out. Nothing actually done today. stupid work. almost midnight so I'm tired and heading to bed. later. [img]style_emoticons/<#EMO_DIR#>/sleeping.gif[/img] [img]style_emoticons/<#EMO_DIR#>/sleeping.gif[/img] [img]style_emoticons/<#EMO_DIR#>/sleeping.gif[/img]

ConductorX April 15th, 2005 08:58 AM

I cut the sand rail in half last night to fix the misaligned tranny. I realigned the steering box and installed the steering wheel and shaft.

"G"

http://photoalbum.kaferweb.com/album...l/IMG_0978.jpg

http://photoalbum.kaferweb.com/album...l/IMG_0980.jpg

purplepeopleeater April 15th, 2005 10:09 AM

i brought home my 2 new bugs....mashed up the 68 auto stick pretty good unloading it....tore a tranny line....bent the header.....bent the t-bars [img]style_emoticons/<#EMO_DIR#>/crybaby.gif[/img] [img]style_emoticons/<#EMO_DIR#>/crybaby.gif[/img]


oh well...almost fixed as of last night

FlatBlacker April 15th, 2005 05:37 PM

Yesterday I pulled the motor and transmission out of my beetle [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

Steve April 15th, 2005 05:47 PM

Ok... something car related... [img]style_emoticons/<#EMO_DIR#>/eek1.gif[/img]

Well, didn't really "DO" anything to the 'Buncher...
But I did make an appointment to have the belly-burner exhaust welded up for next Wednedsay! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]









...ok, so that was lame. [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]

busguy71 April 15th, 2005 06:04 PM

so today I decided to go into the woods and "aquire" a free roof off an abandoned beetle. I was sawing it with my buddy when I busted my knuckle and it started gushing blood. He gave me a used tissue and it quickly bled through that. I got back to my car and tied a used sock on it til I got home. Then I put a bandaid and some tape on it, but it bled through that cause it kept bending. Then I figured I'd put a splint on it so it wouldnt bend, but I didnt have any popsicle sticks, so I had to eat a popsicle. That gave me nasty brain freeze. I finally taped it up with the popsicle stick, but the wood was sticking way out past my finger. So I took the same saw I was using when I busted my knuckle and sawed off the popsicle stick on my finger. Then I ground the stick, on my finger, on the grinding wheel. Thank god for boy scouts training [img]style_emoticons/<#EMO_DIR#>/imwithstupid.gif[/img]

Ryan April 15th, 2005 07:42 PM

Quote:

Originally posted by Steve@Apr 15 2005, 09:47 PM
Ok... something car related... [img]style_emoticons/<#EMO_DIR#>/eek1.gif[/img]

Well, didn't really "DO" anything to the 'Buncher...
But I did make an appointment to have the belly-burner exhaust welded up for next Wednedsay! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]
<div align="right">Quoted post</div>

right on brotha man!

that is going to look sick!


i brought home my 58's actual pan from grandmas house tonight... its still sitting in my truck though..... plan is to clean it all up so this winter i can swap the body onto it.

walt April 15th, 2005 08:15 PM

Quote:

Originally posted by busguy71@Apr 15 2005, 06:04 PM
so today I decided to go into the woods and "aquire" a free roof off an abandoned beetle. I was sawing it with my buddy when I busted my knuckle and it started gushing blood. He gave me a used tissue and it quickly bled through that. I got back to my car and tied a used sock on it til I got home. Then I put a bandaid and some tape on it, but it bled through that cause it kept bending. Then I figured I'd put a splint on it so it wouldnt bend, but I didnt have any popsicle sticks, so I had to eat a popsicle. That gave me nasty brain freeze. I finally taped it up with the popsicle stick, but the wood was sticking way out past my finger. So I took the same saw I was using when I busted my knuckle and sawed off the popsicle stick on my finger. Then I ground the stick, on my finger, on the grinding wheel. Thank god for boy scouts training [img]style_emoticons/<#EMO_DIR#>/imwithstupid.gif[/img]
<div align="right">Quoted post</div>


[img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img] [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]

You're nuckin futs.

spraypaintspecial April 15th, 2005 10:00 PM

[img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] I found out tonight that a buddy is getting a new bug project, but doesn't want the running 1600.... $400 and its Mine. Nothing better than two engines!!!! [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img]

mkparker April 16th, 2005 04:24 AM

OK...I'll jump in.....replaced the starter on the wife's 2000 Intrepid....OH...MY....GOD!
Almost 4 hours and many cuts, scrapes and really bad words later....tada! I'm pretty sure the starter was the first part of the car they started with...then added the rest around it....who could be so stupid to design a car this way?(rhetorical) I had to disassemble the old starter in place so I could get it out...not wanting to do the same to the new unit, I ground about a half inch off the motor mount......popped right in. New(er) cars suck when ya have to work on 'em! [img]style_emoticons/<#EMO_DIR#>/mad.gif[/img]

Today we're off to see "Dust to Glory"!!! [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

speedfreak April 16th, 2005 06:59 PM

just got back from a 12 hour round trip drive to bring home my '64 hdtp we start on it tomorrow, damn, it's about time!!! [img]style_emoticons/<#EMO_DIR#>/blink.gif[/img]

NICKSTER April 16th, 2005 07:01 PM

Quote:

Originally posted by speedfreak@Apr 16 2005, 06:59 PM
just got back from a 12 hour round trip drive to bring home my '64 hdtp we start on it tomorrow, damn, it's about time!!! [img]style_emoticons/<#EMO_DIR#>/blink.gif[/img]
<div align="right">Quoted post</div>


Right on! Start cutting........................... [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

juggalo April 17th, 2005 06:49 AM

Got back last night with my brand spankin new $800 '65. [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img](thanks nickster for the tow bar [img]style_emoticons/<#EMO_DIR#>/thumbsup.gif[/img] ) pics will be up in a couple days while i am waiting on a new charger for my digital camera(dont ask [img]style_emoticons/<#EMO_DIR#>/yelling.gif[/img] )

pistolpete76 April 17th, 2005 09:54 AM

Quote:

Originally posted by Steve@Apr 15 2005, 05:47 PM
Ok... something car related... [img]style_emoticons/<#EMO_DIR#>/eek1.gif[/img]

Well, didn't really "DO" anything to the 'Buncher...
But I did make an appointment to have the belly-burner exhaust welded up for next Wednedsay! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

no way steve, thats cool, its progress right man, plus its custom and its going to rock







...ok, so that was lame. [img]style_emoticons/<#EMO_DIR#>/dry.gif[/img]
<div align="right">Quoted post</div>


ConductorX April 17th, 2005 06:46 PM

Saturday:

Saturday I removed the broken flexplate from the autostick. My first pass at welding on a new bolt and I burnt a new hole in the flex plate.
http://photoalbum.kaferweb.com/album...n/IMG_0985.jpg

I took a piece of another plate and made a patch.
http://photoalbum.kaferweb.com/album...n/IMG_0986.jpg

Once the patch was made I setup the new bolt for welding.
http://photoalbum.kaferweb.com/album...n/IMG_0989.jpg

I tack welded all the bolts to the plate.
http://photoalbum.kaferweb.com/album...n/IMG_0990.jpg

Afterwards EJ and I installed the engine and only have the wiring and exhaust to finish.
http://photoalbum.kaferweb.com/album...n/IMG_0997.jpg

We also checked EJ's front brakes and replaced his rear brake shoes. After adjusting his brakes and and a test drive in the neighborhood EJ was pleased with the results.

http://photoalbum.kaferweb.com/album...s/IMG_0992.jpg

ConductorX April 17th, 2005 06:48 PM

Sunday:

Woke up at 3:00am with an unreal sinus headache. Couldn't lay down, sit up or see anything. Took some Excedrin Migraine and finally got back to sleep at 4am. 6:30 I got an urgent phone call from a guy with generator problems wanting to know about polarizing the thing to get it generating. After refering him to several good websites I tried to return to the land of nod. Couldn't sleep now... looked up wiring diagram and called him back.

Today Jerry and I installed a header and sorted out some of the wiring on the autostick.

The header was a used item, I wire brushed it and cleaned it with POR-15 metal prep. Then we painted the whole header and muffler with POR-20 high temp rust fighting paint. I'll keep you posted on how it works.

The car is a nightmare, trying to decipher the wiring diagram and the insert diagram for an autostick. We filled the engine with oil and auto tank with tranny fluid.

Jerry installed a filter in the fuel line under the fuel tank. I put in a new fuel filter after the fuel pump.

After making some minor wiring repairs we were able to start the car.

I don't have any of the autostick controls wired so we couldn't drive it. :p

I feel we made good progress and I regret missing the Boomtown show.
http://photoalbum.kaferweb.com/album...1020.sized.jpg

vwfanatic April 18th, 2005 03:32 AM

2 swap meets this weekend....went to jersey friday to shop....found a $20 hood for the project, they yesterday we vended at an awesome swap put on by a model A club in upstate massachusetts.....still didnt find a pickup bed though [img]style_emoticons/<#EMO_DIR#>/cry.gif[/img]


also fabricated my custom dash up at jim's shop saturday, and primed it last night....light sanding and some blitz black, and it will be ready to fly out west with me to be honored by the brush of pistol pete [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

BOOOGHAR April 18th, 2005 04:26 AM

i went outside to my car, looked at it, kicked the front apron, it fell off, i got mad then went back inside [img]style_emoticons/<#EMO_DIR#>/blink.gif[/img]

Ryan April 18th, 2005 04:30 AM

buhahaha... i went to boooghar's house and messed with his front apron so when he would come out and kick it ,..... it would fall off

NICKSTER April 18th, 2005 06:35 AM

I took my 11 year old daughter Janine, we stold Momma's Hummer, and headed to Las Vegas Motor Speedway for the Powerade Finals! Got to the ticket window, spent $90.00 on the best reserved handicapped seats they had, and proceed by golfcart to the pits!. (The NHRA really takes great car of us handicapped folks). We looked around for about 5 minutes and I heard them fire up the top fuel dragsters for one of the semi-final rounds. Well, my little girl freaked out! She has never been to the races before and she was completely overcome by the noise! She was crying so hard she was shaking! Well, we never even got to our seats! I thought she was going to pass out she was crying so hard! Needless to say, we left! [img]style_emoticons/<#EMO_DIR#>/crybaby.gif[/img] Then we went to I-Hop, had some fancy pancakes,then went home to watch the races on TV. (I cranked up the pair of subwoofers in my game room and she started hitting me!) Other than that, I had a great day! [img]style_emoticons/<#EMO_DIR#>/confused.gif[/img]

ConductorX April 18th, 2005 08:16 AM

Quote:

Originally posted by NICKSTER@Apr 18 2005, 06:35 AM
I took my 11 year old daughter Janine, we stold Momma's Hummer, and headed to Las Vegas Motor Speedway for the Powerade Finals! Got to the ticket window, spent $90.00 on the best reserved handicapped seats they had, and proceed by golfcart to the pits!. (The NHRA really takes great car of us handicapped folks). We looked around for about 5 minutes and I heard them fire up the top fuel dragsters for one of the semi-final rounds. Well, my little girl freaked out! She has never been to the races before and she was completely overcome by the noise! She was crying so hard she was shaking! Well, we never even got to our seats! I thought she was going to pass out she was crying so hard! Needless to say, we left! [img]style_emoticons/<#EMO_DIR#>/crybaby.gif[/img] Then we went to I-Hop, had some fancy pancakes,then went home to watch the races on TV. (I cranked up the pair of subwoofers in my game room and she started hitting me!) Other than that, I had a great day! [img]style_emoticons/<#EMO_DIR#>/confused.gif[/img]
<div align="right">Quoted post</div>

Bummer dude. Need to get her a set of headphone style ear muffs. She'll get the hang of the noise easier.

ThrasherBill April 18th, 2005 11:24 PM

Got a pair of 145's today so I can get Herr Pie's nose out of the air for this weekend. Tomorrow night I'll be messing with the carb (seems to have crap floating around in it causing it to bog everyonce in a while) and hopefully get my new signal switch installed.


ThrasheR

ConductorX April 19th, 2005 03:31 AM

So from the calendar and from looking at my posts I started working on the Autostick some 60 days ago on February 18th. Last night I continued sorting out the wiring issues. I got the wiring mostly sorted out.

Last night (Monday) I drove an autostick for the first time in my life. It is actually kind of fun to drive and still has some bugs to work out. After the road test Alex got to drive it back into the barn.

I successfully converted it from generator to alternator. Oil pressure sender and gas gauge works. All lights appear to work.

Horn doesn't work.

I have to pull the pulley... rubbing on the tin ware.

Doesn't seem to have any pep but I didn't want to push it.

Brake pedal leans over the wrong way.

I have to decipher the tranny interlock switch... it is bypassed.

I have to complete the floor board repairs.

I have to set up the heater boxes and hoses.

I have to install the rest of the tin on the bottom of the motor.

Alex has started sanding the body. Think she is jumping the gun but let her go for it.

BIG BAD BUG April 19th, 2005 10:22 AM

Nickster that story reminds me of the time I treated my brother and his wife and 4yo daughter to a day at the Royal Show... (You guys call 'em Fairs I think)..
Anyway there was a busker there, (you guys call Them sidewalk performers I think), and his main act was/is sword swallowing... (You calls call that Sword Swallowing too I think)... This guys is actually a friend of my brother and if you check the Guiness Book of World Records under Sword Swallowing, you'll find him in there...
So anyway, He starts his act and does a swallowing routine first with one of those big long balloons that clowns make balloon dogs and stuff like that out of...
Well, and Here's the BIG tip for yuz, a 4 Year Old after a morning of going Hard at the Doughnuts, ice cream, ribs, corn, chips, fairly floss, (you guys call that cotton candy), soft drinks (you guys call that Soda, or Pop) and other assorted Fair Ground Treats.... THE LAST THING you EVER want to DO, is let a 4 Year Old girl with a weak, and Very FULL Stomach, watch a guy doing any sort of show involving swallowing objects...!!!! Particually, when you're standing in a shoulder to shoulder crowd at the fair ground with a child that is elevated, so as to see the show....!!!
I tell ya, it was like a scene from The fuckin' Exorcist, except there was no Priest... How the hell that kid was able to spray vomit like that is still a mystery to me, to this very day... But I gotta tell ya... It took all of an hour for me to finally stop Laughing...!!!
aahhhhhhhhhhhhh....
Good times.... funny shit...





But I digress... What did I do...??? I got closer to making a descision about which car I'm gunna use to build what Volksrod...

Steve April 19th, 2005 06:32 PM

Ok... well, it was today and I can't wait for tomorrow, but...

just got back fromt the glass shop to have the 'Buncher's windshield chopped! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] Should have it by Thursday!

And yesterday, I continued a mad thrash to get my garage organized and tore apart my headlights so I can modify them to be actual headlights...

Turns out that old 5" foglight bulbs have different tabs molded around the bulb than standard 5" headlight bulbs. So they won't fit into the housings. I had to order tractor lights with the single tab (instead of the 3 that a standard bulb has).

So yeah... I know that made no sense to anyone but me... but that's ok. Yay for me. [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]

bugdust April 19th, 2005 06:49 PM

I'm still trying to get my workshop finished. The service panel is mounted and the conduit is done, should have the actual wire in tomorrow so I can have power [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

walt April 19th, 2005 06:49 PM

Quote:

Originally posted by Steve@Apr 19 2005, 07:32 PM
Ok... well, it was today and I can't wait for tomorrow, but...

just got back fromt the glass shop to have the 'Buncher's windshield chopped! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] Should have it by Thursday!

And yesterday, I continued a mad thrash to get my garage organized and tore apart my headlights so I can modify them to be actual headlights...

Turns out that old 5" foglight bulbs have different tabs molded around the bulb than standard 5" headlight bulbs. So they won't fit into the housings. I had to order tractor lights with the single tab (instead of the 3 that a standard bulb has).

So yeah... I know that made no sense to anyone but me... but that's ok. Yay for me. [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]
<div align="right">Quoted post</div>

I'm bringing all of my wiring stuff. What else do we need?

Steve April 19th, 2005 07:04 PM

Quote:

Originally posted by walt+Apr 19 2005, 06:49 PM--><div class='quotetop'>QUOTE(walt @ Apr 19 2005, 06:49 PM)</div><div class='quotemain'><!--QuoteBegin-Steve@Apr 19 2005, 07:32 PM
Ok... well, it was today and I can't wait for tomorrow, but...

just got back fromt the glass shop to have the 'Buncher's windshield chopped! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] Should have it by Thursday!

And yesterday, I continued a mad thrash to get my garage organized and tore apart my headlights so I can modify them to be actual headlights...

Turns out that old 5" foglight bulbs have different tabs molded around the bulb than standard 5" headlight bulbs. So they won't fit into the housings. I had to order tractor lights with the single tab (instead of the 3 that a standard bulb has).

So yeah... I know that made no sense to anyone but me... but that's ok. Yay for me. [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]
<div align="right">Quoted post</div>

I'm bringing all of my wiring stuff. What else do we need?
<div align="right">Quoted post</div>
[/b][/quote]

I got a harness in place... just need to connect the dots. The very VERY confusing dots... [img]style_emoticons/<#EMO_DIR#>/funny.gif[/img]

Just got a fresh new battery... Gotta fabricate brackets for it yet.

Um... one thing I do need is a good suggestion on connecting the straight hollow steering shaft to the splined shaft at the steering box.. It's a straight shot, all lined up and the right length and everything... just curious about the actual "connecting them up" part. I've heard welding it is not good... Right now there's just a bolt going through them both to let me steer it around in the driveway.

speedfreak April 19th, 2005 07:19 PM

hey steve, I think Flaming River makes an adapter to do that with your steering shaft... if I remember right, it's an adapter with set screws that slips over each shaft..


so, today my son and I removed all of the necessary bolts, wires etc. to take the body off of the '64. now we just need to make room in the garage to stash the body!!! [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img] [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]

walt April 19th, 2005 08:01 PM

You should probably be using the stock rag joint. I'll bring one if you don't have one.

vwfanatic April 20th, 2005 03:24 AM

steve - we machined a few thousandths off the inside of the shaft and it was a tight press fit in. then we slotted the shaft so it could be plug welded to the end of the SB steering shaft. pix near the beginning of my intro page


oh and i dug out some very slightly used heater channels i had (were welded into a car that was bailed on (well actually became the buggarden) and were then cut back out)....anyway, i cleaned and ground off all the welds and boogers and other remains and got them ready to go in. also started getting the box ready to transport pistol p-ete's canvas out west [img]style_emoticons/<#EMO_DIR#>/Dancing.gif[/img]


All times are GMT -8. The time now is 02:25 AM.

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2020 Three Pugs Design - Cut Weld Drive Forums