Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Cutting Board (http://volksrods.com/forum/forumdisplay.php?f=5)
-   -   Motorcycle Thread (http://volksrods.com/forum/showthread.php?t=8918)

alykat April 7th, 2020 05:49 AM

Re: Motorcycle Thread
 
Next pic will be you pulling a wheelie in the driveway with it ? Smart move switching out the points. Those dual set ups are prone to break down.

Ozrod July 7th, 2020 03:14 PM

Re: Motorcycle Thread
 
Have a talented daughter who drew a nice pic of my bike.

https://live.staticflickr.com/65535/...8da662dd_c.jpg

https://live.staticflickr.com/65535/...64b45170_c.jpg

V8Transporter July 7th, 2020 08:51 PM

Re: Motorcycle Thread
 
Nice work! The bike in the lower picture looks sweet too.🙄🙄🤪

V8Transporter October 30th, 2020 08:45 AM

Re: Motorcycle Thread
 
Once again Iím having a problem with the side stand switch setup on my Ď82 Yamaha 650 Seca. Last year I swapped in another switch and clutch switch because the bike would die when I put it in gear. Since the bikes been running a sidecar for years the side stand never gets used. Anyway, things were going fine until a month ago when the problem returned. Iím looking to bypass the system. Any ideas, suggestions?

1slo3 October 30th, 2020 09:01 PM

Re: Motorcycle Thread
 
I bypassed the one on my old yamaha 650

V8Transporter October 31st, 2020 01:13 PM

Re: Motorcycle Thread
 
Sounds like Ďthe plan.í

V8Transporter November 1st, 2020 04:34 PM

Re: Motorcycle Thread
 
Is there a fairly Ďeasy way of doing this? Iím going over the wiring diagram and itís pretty Ďinteresting.í

V8Transporter November 7th, 2020 09:51 PM

Re: Motorcycle Thread
 
Letís hear it for Google! I entered the problem and it gave me three solutions complete with photos. Tomorrow Iíll try it out.

1slo3 November 9th, 2020 11:33 PM

Re: Motorcycle Thread
 
:thumbsup:

V8Transporter December 15th, 2020 12:00 PM

Re: Motorcycle Thread
 
With a very simple Ďbypass of the clutch and side stand switches, the old Seca is running just fine. Itís funny that with the sidecar I never use the side stand, so maybe the clutch switch was the real problem. But itís fun going out on the rig. At the hardware store in town a young couple wearing masks and keeping their distance were interested in a rig so they could take their small dog and three year old daughter for rides. They each have a bike and are thinking about a three wheel family ride.

Ozrod December 17th, 2020 02:47 PM

Re: Motorcycle Thread
 
While she was shopping I spotted this gem wandering around the streets of Sydney a while back.
https://live.staticflickr.com/65535/...72371208_c.jpg

No front brakes, so air cleaner, no speedo and rigid rear end, way old school shovel.
https://live.staticflickr.com/65535/...bd91113b_c.jpg

On first look I thought the rid around the tank was air brushed, closer inspection
itís raised and molded into the tank.
https://live.staticflickr.com/65535/...5ecec15f_c.jpg

Nice alley trash!
https://live.staticflickr.com/65535/...d157975d_c.jpg

V8Transporter December 17th, 2020 04:08 PM

Re: Motorcycle Thread
 
You mean Classic Alley Trash. You donít see many old Shovelheads like this around. I love checking them out, thanks.

V8Transporter May 3rd, 2021 11:01 AM

Re: Motorcycle Thread
 
A couple days ago I finally got around to going over the side stand switch wiring to finish up and discovered that one of the small Ďpush connectorsí had moved back into the plug so contact was pretty sketchy. With it back in place, all is well.

marnat3 May 3rd, 2021 01:27 PM

Re: Motorcycle Thread
 
:clapping::dancing:

V8Transporter June 28th, 2021 09:20 PM

Re: Motorcycle Thread
 
With the Seca running well, Iím doing a few mods Iíd planned sometime back. The Euro and Canadian 650 Seca came with an oil cooler, but for some reason not the bikes sold in the U.S. With the extra weight of the Jawa sidecar and things heating up a bit I figured a cooler might be a good idea. A few years back I paid about 75 bucks for two worn out 650 Yamaha cruisers and a cardboard box of spares. One thing I discovered in the bottom of the box was an aftermarket cooler and an adapter to attach the lines behind the oil filter housing, pretty much like the factory setup. Today I made up a pair of lines and checked over the cooler. Iíd planned on changing the oil, so this should go well and the rig will be ready for Summer.

Bugula June 29th, 2021 05:43 AM

Re: Motorcycle Thread
 
Cool in two ways!


All times are GMT -8. The time now is 05:10 AM.

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright ©2002 - 2020 Three Pugs Design - Cut Weld Drive Forums