Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   Upcoming Events (http://volksrods.com/forum/forumdisplay.php?f=8)
-   -   Volksfest 2012 (http://volksrods.com/forum/showthread.php?t=35331)

Scott76 February 28th, 2012 09:38 AM

Volksfest 2012
 
Hope we can get the gang back together again this year.

http://www.parenfaire.com/volksfest/

See you guys there in the vendors spot again.

backpackr63 February 29th, 2012 09:03 PM

Re: Volksfest 2012
 
I already had the date penciled in on my calendar, but it's not looking too promising at the moment. I'll be disappointed if I can't go. I enjoyed it last year and it was great meeting a few people from the site.

Scott76 March 2nd, 2012 05:12 AM

Re: Volksfest 2012
 
Hope you come down and spend a little longer thais year. No need to rush off like last year.

Timmy11 April 3rd, 2012 10:04 AM

Re: Volksfest 2012
 
I will be there working the show again this year.
We are working to get everyone in more quickly this year. We will have porta johns up by the vending area. You are welcome Scott.
We will be coming around the vending area to collect forms.
There will be more staff on hand for food and beverages.
Don't forget the great deli across the street - just saying.
Be discreet with you own "water" and all is good.
I am still working on getting my motor running right so I am not sure if I will have Sure-Lee there or not. Either way I will be there.
The Pa Route 72 bridge over the Turnpike will be under construction and lanes will be narrow and shifted. Gates open at 7 am for vendors and HAVOC can't let anyone in early. If you come early you will need to find a staging area. I would suggest somewhere south of the turnpike so that you don't have to wait in the construction pattern.

Hope to see you all there. :driving:

Tim

andk5591 April 6th, 2012 12:39 PM

Re: Volksfest 2012
 
Totally bummed that I will miss it this year - I even volunteered to work it but I will be in North Carolina for a buddy and former band mates milestone birthday party/ all day jam.

But I am hiting the Campbelltown show next weekend. Hope some of you are hitting that one too - dont want to be the only ACVW there LOL.

metalmaster1766 April 7th, 2012 07:49 AM

Re: Volksfest 2012
 
Well dadgumit again, I'll make it some day to some of these shows, I just can't afford the gas $$ it would take to drive 1100 miles to & from the shows that are over 50 miles away

There is always next year :Idunno:


Ron

Timmy11 April 9th, 2012 05:19 AM

Re: Volksfest 2012
 
I plan on heading over to Campbelltown on 4/14. I don't know if I will be in my Bug or not. Still working on it.

Scott76 April 9th, 2012 07:07 AM

Re: Volksfest 2012
 
The Volkfest will be a blast again this year. I'm sure you'll see a group of us in the vendor area. Yea we will be carefull with our "water". It doesn't matter what food you get on the grounds. Thats Deli across the road is going to be hard to beat.

I'm sure Brendan will be happy to hear about the porta johns. He's the one who pissed all over the back of his van cause "someone" was rocking it as he was trying to piss a bottle... LOL....

No sure about the campbelltown show. I really would like to go but also would like to get more housework done too. Who's putting on the C-town show? Whats the times for it too?

What the TurnPike doing some work are they? If they would get a good traffic engineer to plan better traffic patterns, we wouldn't have to wait in construction that much... :wink:

Timmy11 April 10th, 2012 06:18 AM

Re: Volksfest 2012
 
I plan on stopping in at the Campbelltown show on Sunday just to check it out. It sounds like a lot of H2O cars. I hear that it benifits the firehall. Hopefully with the firehall is involved they will be a little more helpful.

Sorry Scott - I can't stop progress. You know that we all need the work. I think that there will be 11' lanes and traffic will be shifted. It should not be that bad.

HAVOC is meeting this Saturday so I will let you know if there is any new info.

Hope to see you all at Volksfest!

Tim

Timmy11 April 11th, 2012 01:03 PM

Re: Volksfest 2012
 
Hey There - We have a HAVOC meeting this Saturday. Does anyone have any other suggestions or requests? I can't promise anything, but I can pass it along. :Idunno:

1 that I just received was to have the grass cut.

Tim

Scott76 April 12th, 2012 02:07 AM

Re: Volksfest 2012
 
I have nothing. I think it was just fine last year. I can't remember any problems besides the line to get in & that wasn't that bad in the early morning.

I know Brain will be there with his trailer, I'll be there with Da Bastard, Brendan will be there with his Linc., and not sure about Jay. We will be in the vending spaces again. If there is anyone else coming to setup let me know so I can save a space for you. Or if you come to just walk around stop in & say hi. This show is always fun.

Hey Tim. I don't mind the lane shifts. Its those little bumps that I get hung up on. Its never pretty.. Oh yea. You remember my freind Mike from Hershey? He's the manager for BMS2 now.

Timmy11 April 12th, 2012 07:17 AM

Re: Volksfest 2012
 
Hey Scott - The bumps are only on the other roads. The Turnpike is smoooooth.

I just heard the other day that Mike is down at the Glue Factory. That is great.

Are you planning on going to the Jalopy Showdown this year? I might head over in the afternoon after hitting up the Import show in the AM.

See you all in a few weeks. Bring some Apple Pie. :dancing:

Scott76 April 13th, 2012 01:54 AM

Re: Volksfest 2012
 
Tim - The wife will be away the weekend of the showdown. So I plan to take the Chevy all weekend. It might get a little crazy.

Yea the TP is alot smoother than the other "paved" goat paths around here. I'll bring a bushel of apples.

Scott76 April 24th, 2012 06:35 AM

Re: Volksfest 2012
 
This Saturday!!!

Timmy11 April 25th, 2012 03:03 PM

Re: Volksfest 2012
 
Be there!!!! It will be a good time.


All times are GMT -8. The time now is 02:28 AM.

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2020 Three Pugs Design - Cut Weld Drive Forums