Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Tech Bin (http://volksrods.com/forum/forumdisplay.php?f=17)
-   -   Domestic tierods ? (http://volksrods.com/forum/showthread.php?t=12757)

Unkl Ian September 12th, 2006 09:50 AM

Domestic tierods ?
 
The old Ford's used oddball threads on their tie rods etc.
You can buy the correct size tap,or threaded bungs,
from the Butt Pirates at Speedway.
Or substitute easier to find parts with more common threads.

Any decent parts store can get any of these tie rods,
and any decent industrial supplier will have taps.

Some of the tapers might be different sizes,so investigate before you buy.




Moog/TRW# - thread - Application

ES150R 3/4"x16 RH '61-66 Chevy 1/2 & 3/4 ton 4x4, 48-76 Ford 1/2 ton 4x4 w/ DANA


ES150L 3/4"x16 LH '61-66 Chevy 1/2 & 3/4 ton 4x4, 48-76 Ford 1/2 ton 4x4 w/ DANA


ES2847R 3/4"x16 RH '86-96 Dodge 1/2, 3/4, 1 ton 4x4 w/ 3500lb. axle (DANA 44)

ES2848L 3/4"x16 LH '86-96 Dodge 1/2, 3/4, 1 ton 4x4 w/ 3500lb. axle (DANA 44)

ES361R 11/16"x18 RH '66-78 Eldorado & Toronado

ES370L 5/8"x18 LH '65-68 Bel Air, Biscayne, Caprice, Impala

ES370R 5/8"x18 RH '65-68 Bel Air, Biscayne, Caprice, Impala

---


All this info came from Howe Racing Ent:
http://www.howeracing.com/Steering/I...-Precision.htm

Ray-Dean September 12th, 2006 10:59 AM

Re: Domestic tierods ?
 
NOW YA TELL US!!!! :panic:

I just pais the "Butt" Pirates at Speedway for a set of heim joints and removed the taper.

Good info though. :thumbsup:

Hotrodpez September 13th, 2006 12:24 AM

Re: Domestic tierods ?
 
tech bin this shit!

Unkl Ian December 30th, 2008 07:12 PM

Re: Domestic tierods ?
 
I found some killer charts, with detailed
tierod dimensions, in PDF format.


Part numbers are Moog/TRW::


Dead link EDIT.

Unkl Ian June 8th, 2009 07:44 PM

Re: Domestic tierods ?
 
I've got those dimension charts, on my site now.
Look towards the bottom of the Links page.


All times are GMT -8. The time now is 11:56 AM.

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2020 Three Pugs Design - Cut Weld Drive Forums