View Single Post
Old January 22nd, 2011, 02:09 PM   #2
purplemyth
moody witch
 
purplemyth's Avatar
 
Join Date: Aug 2005
Location: central ga.
Posts: 12,173
Member Photo Albums
Default Re: Beam adjusters install instructions

I'm adding this for those it might help~ since the directions to install don't exactly tell you how to adjust.

Quoted from Don at chirco~

Quote:
This should be fairly straight forward.
Jack up the front end a put it on two jack stands, one on each side.
On your adjusters, the bottom screw and nut is the adjustment and the upper puts tension on your leaf springs.
If you tighten your adjustment screws, you will be rotating the springs up, forcing your control arms down and that raises the stance of the car.

Do this adjustment a little at a time to both your upper and lower beam tube, until you get the stance you want.
Then lock down the jam nuts so it stays in place.


from this thread~

http://www.chircoestore.com/catalog/...26729#msg26729
__________________
Like it, Click it, support it.
Quote:
Originally Posted by fishguts
My attraction to volksrods is that these are bottom-feeders where things are still real ... people scraping together parts, doing their own work and often on a tight budget. Real hot rodding is still alive here.
purplemyth is offline   Reply With Quote