View Single Post
Old November 24th, 2013, 05:06 PM   #15
Forum Member
markh's Avatar
Join Date: Jan 2008
Location: Vancouver, WA
Posts: 661
Default Re: 1930 Roadster Volkster

Got the inner pivot points welded in, the swing plates cut down and cleaned up. .

Dropped the trans and motor in and started bolting it together for another mock up.

Have a few issues to address:
Shock towers needed to go.
The 3X3 trailing arms needed ravel clearance
Trailing arm bolt holes need elongated to fix toe.
The Model A quarter panels needed suspension travel clearance.
The tires are towed in pretty good so a much needed alignment will be required.

But I'm really happy about the camber situation. Almost NONE!

Getting closer

Last edited by markh; July 23rd, 2017 at 10:07 AM.
markh is offline   Reply With Quote