Cut-Weld-Drive Forums

Go Back   Cut-Weld-Drive Forums > The VolksRodders Forum > The Cutting Board

The Cutting Board Cut... Weld... DRIVE.


User Information
Your Avatar

Stuff to check out...

Cool stuff you NEED!

Forum Stats
Members: 17,564
Threads: 32,396
Posts: 547,665
Total Online: 581

Newest Member: Tylerted

Latest Threads
- by DrHax
- by Bugula

 
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old July 7th, 2020, 12:49 PM   #1
sallyandsean
Forum Member
 
Join Date: May 2011
Location: England
Posts: 142
Member Photo Albums
Default Sway away help needed please

My car has sway away adjusters and a ball joint beam with drop spindles. I was going to lower it by about 10mm or so so started to slacken off the bolts. On the bottom adjuster as I started to slacken the top bolt that goes inside to the leafs, the bolt sprung out and I think it has turned inside as I cant see the tread any more.

The car was suspended on jack stands with wood blocks under the wheels to stop them dropping. It felt like there was tension to the spring.

I took the same one out on the top adjuster and noticed the small internal grub screw was in the bottom hole. Should they be on the top with the adjustable bolt in the bottom?

Also, am I correct in assuming that if I undo the castle nuts on the ball joints, will I be able to just twist the arms back to where they should be so I can put all adjuster bolts back on and set the height.

Hope this all makes sense
sallyandsean is online now   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 03:57 AM.


Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright ©2002 - 2020 Three Pugs Design - Cut Weld Drive Forums